How To Set Up Metal Bed Frame

How To Set Up Metal Bed Frame. Some frames come with free brackets included which are compatible with various headboard options. For installing the bed bolts, i need to drill a hole through the leg of the bed frame, and also into the ends of the bed rails.

Metal Platform Bed Frame with whimsical curves,Metal Slats
Metal Platform Bed Frame with whimsical curves,Metal Slats from www.walmart.com

Some frames come with free brackets included which are compatible with various headboard options. Drill holes into your scrap piece of wood 2” apart with a 3/16” bit and drill, but make sure the holes are staggered and not in a straight line. Put on the feet or wheels.

This Modern Design Is Rated For Up To 700 Pounds.

If you’d prefer to donate an adjustable bed than have it wind up in a landfill, choose loadup for the greener choice! Press the right side of the frame firmly against the headboard. Next, you will build the frame and attach the assembled legs to the side rails, end rails, and support beam.

A Full Metal Design, This Bed Features A Lot Of Extra Packing Space And Is Also The Greatest Option For Tall Couples Or Pairs Which Have One Taller Partner.

The directions for assembly are below: You’ll start by assembling the legs. Drive the bolts through the back of the headboard so that they protrude from the holes in the front.

Set The Side Rails On The Floor Apart From Each Other.

Insert bolts through these holes, then add washers, and finally screw on and tighten the nuts with a wrench. For installing the bed bolts, i need to drill a hole through the leg of the bed frame, and also into the ends of the bed rails. Attach the nuts to the bolts and tighten them as much as you can as you press the headboard to the metal bed frame.

Then Slide The Plastic Inserts On Top Of The Leg Extensions.

Line up these holes with the holes in the end of one of the side rails. Using a saw or table, cut a strip of ½” scrap wood such as plywood, to match the measurements you just took. So, i first made a jig to guide the drilling of these holes.

Connect The Included Feet Or Wheels To The Small Beams Extending From Each Frame.

How to put together a king metal bed frame. Drill holes into your scrap piece of wood 2” apart with a 3/16” bit and drill, but make sure the holes are staggered and not in a straight line. The side rails are the two.

Leave a Comment